Ultrasonic transducer

Ultrasonic metal welding is a special method to connect the same or dissimilar metals by using the mechanical vibration energy of ultrasonic frequency. In ultrasonic welding, the metal neither transmits current to the workpiece, nor imposes high temperature heat source on the workpiece, but transforms the mechanical energy into internal energy, deformation energy and limited temperature rise under static pressure. Solid phase welding of two base materials at recrystallization temperature. Therefore, it can overcome the spatter and oxidation phenomenon of resistance welding effectively. Ultrasonic metal welder can weld single point, multi-point and short strip of copper, silver, aluminum, nickel and other non-ferrous metal wire or thin sheet materials. It can be widely used in the welding of SCR lead, fuse, electrical lead, lithium battery pole and pole lug.

1. Advantages:

- Non-melting, non-fragile metal properties of welding materials

- Good electrical conductivity after welding, very low resistivity or nearly zero

- Low requirement for welding metal surface, oxidation or electroplating can be welded

- Short welding time, without any flux, gas, solder

- Welding spark free, environmental protection and safety

2. Strong independent development and design team

3. Rich application cases

4. industrial application accessories optimization and upgrade development, strong versatility

5. the basic original materials import custom design, production integration

6, more than 40 processing technology to ensure the service life

7. Strong ability of non-standard customization

8. Fast response speed to avoid delay of production line

9. Application Scope:

All kinds of ultrasonic specifications (such as: ultrasonic hand-held pipe sealing machine, wire harness welding, spot welding machine, communication cable, control cable, power supply, tool head) ultra accessories loss parts, as well as the upgrade and optimization of line standard products.