Characteristics of flux ultrasonic spraying atomization

Characteristics of flux ultrasonic spraying atomization -- Ultrasonic atomization -- YMUS ultrasonic spraying

Ultrasonic atomization is the use of ultrasonic atomization technology, the liquid flux into atomized shape and coated on the welding surface of PCB.

YMUS ultrasonic spraying, atomization method compared with spray atomization method can produce high velocity jet flow, and then through ultrasonic vibration atomization into fog flow. The mist flow formed by ultrasonic atomizing spraying is fine and uniform, which is a real non-pressure coating method.

Note: YMUS Ultrasonic atomizing nozzle

YMUS ultrasonic atomization spraying coating method is necessary: because the mist particles formed by ultrasonic atomization are much finer than direct atomization and air atomization, so that the coating effect is good, less flux consumption, and less residue on the PCB board surface after wave soldering. So far, the advanced flux spraying method in the market generally adopts the principle of ultrasonic atomization design.

Equipment advantage

● Simple operation, low maintenance cost;

● Less residue after welding;

● Flux sealed container storage, no pollution;

● No diluent, flux concentration is controllable;

● Spray particles uniform, small spacing PCBA coating effect is good;

● Save raw materials

● Atomizing nozzle design, low pressure output, no strong airflow

● Small pollution to the environment and equipment