Affect the development of new energy film if the preparation of coating?

Polymer film -- electrolytic cell -- YMUS ultrasonic spraying

Basic (ALK), proton exchange membrane (PEM), anion exchange membrane (AEM) and solid oxide (SOEC) four major electrolytic water technology development.

Anion exchange membrane is a kind of polymer membrane containing alkaline active groups and has selective permeability to anions, also known as ion selective permeability membrane.

Anion exchange membrane has a very wide range of applications, it is an important part of the separation device, purification device and electrochemical components, in the chlor-alkali industry, water treatment industry, heavy metal recovery, hydrometallurgy and electrochemical industry and other fields have played a pivotal role. In recent years, with the development of new chemical power supplies, the application of anion exchange membrane as a battery separator in flow energy storage batteries, basic anion exchange membrane fuel cells, and new supercapacitors has also attracted attention and research. The anion exchange membrane used in the new electric energy conversion device not only plays the role of separating oxidizer and reducing agent, but also plays the role of ion conduction. Therefore, anion exchange membranes need to have high ion selective permeability and conductivity, and should also have good mechanical strength, flexibility, low film resistance and strong chemical stability.

YMUS ultrasonic spraying technology prepares thin film coating so that the coating is evenly distributed during the spraying process. This contributes to the uniformity and consistency of the film coating. The solution utilization rate is high in the spraying process, which can save the amount of material used. Ultrasonic spraying technology can achieve a large area of coating coverage in a short time. The size and distribution of droplets can be controlled by adjusting ultrasonic parameters to meet different coating requirements.

  Application  

◆ New energy: fuel cells, membrane electrodes, thin film solar cells, proton exchange membranes, lithium battery membranes, perovskite solar cells, solar photovoltaic wafers, etc.

◆ Medical: balloon catheter, blood vessel syringe, stent, biosensor, microfluidic chip, heart valve, antibacterial coating, etc.

◆ Microelectronics semiconductor: silicon carbide seed adhesion, flux, photoresist coating, conductive coating, hydrophilic coating, conductive ink, PI, PET, etc.

◆ Glass production: glass coating, float glass, photovoltaic glass, photoresistance film, transparent conductive, electrochromic, etc.

◆ Nanotechnology: carbon nanotubes, polymer fibers, nanofilms, carbon nanotube films, MXenes, graphene composites, etc.